Pre-Owned Cleaners
All cleaners listed on this page have been cleaned, refurbished and well tested in our facility. All machines come with parts warranty. Installation can be quoted separatly. Please give us a call at (714) 394-3870 or email us using the form here for more information.
| 1999 Electrovert AquaStorm 100 | |||||||
|
|||||||
|
Machine configured as follows: - 20” Usable belt Pre-Wash Section: - 1 Upper & 1 Lower Wash Spray bars supplied from 5 HP high pressure pump Heated Wash Section: - 4 Upper & 4 Lower Wash Spray bars supplied from 5 HP high pressure wash pump Final Rinse: - 3 upper and 3 lower spray bar. First Dry Section: - 7-1/2 HP Turbine Sonic blower with 2 upper and 1 lower stainless steel Airknives Second Dry Section: - 7-1/2 HP Turbine Sonic blower with 2 upper and 1 lower stainless steel Airknives Utility Sink at Exit End - 440 volt, 3 phase, 80 amps - ~18 ft long with 3 ft extension x ~5.5 ft wide - Vent: 1200 CFM at negative 2” Static Pressure |
| Technical Devices Nu/Clean 624 PolySMT | |||
|
|||
|
Machine configured as follows: - 24” Usable dual belt with 3’ on-load extension. - 2 Upper & 2 Lower Prewash Spray bars supplied from heated 10 HP Wash Pump - 5 Upper & 5 Lower Wash Spray bars supplied from same 10 HP heated wash pump. - 1 SST Upper Airknive supplied by 5 hp blower in dry section - 1 Upper & 1 Lower Spray bar for chemical isolation - 1 SST Upper & 1 SST Lower Airknive supplied by same 5 hp blower in dry section for chemical isolation - 3 Upper & 3 Lower spray bars supplied from 10 HP Heated Rinse Pump. - 1 Upper & 1 Lower Final rinse spray bar supplied from customer’s DI supply. - 1 SST Upper Airknive supplied by the same 5 hp blower in dry section - First dry section is 15 HP Blower with 2 Top & 1 Bottom SST Airknives. - Second dry section is 15 HP Blower with 2 Top & 1 Bottom SST Airknives. - Third dry section is 15 HP Blower with 2 Top & 1 Bottom SST Airknives. - 480 volt, 3 phase, 160 amps - 23' ft long with 3 ft extension x 5.5 ft wide |
| 2007 Technical Devices NuClean Galaxy | ||||||
|
||||||
|
Machine configured as follows: - 18” Usable Dual belt Heated Wash Section: - 2 Upper & 2 Lower Wash Spray bars supplied from 5 HP high pressure wash pump Heated Rinse Section: - 2 Upper & 2 Lower Wash Spray bars supplied from 5 HP high pressure wash pump Final Rinse: - 1 upper and 1 lower spray bar. First Dry Section: - 5 HP Turbine paxton blower with 2 upper and 1 lower stainless steel Airknives Final Rinse: - 1 Upper & 1 Lower Final rinse spray bar supplied from customer’s DI supply. Second Dry Section: - 5 HP Turbine paxton blower with 2 upper and 1 lower stainless steel Airknives - 480 volt, 82 amps, 3 phase - 10’1” ft long x 5’ 6” ft wide |
| 1999 Trek Triton IV MIL SMT | ||||
|
||||
|
Machine configured as follows: - Stainless Steel Mesh Belt (30” Usable) Prewash Section: - 1 Upper & 1 Lower Prewash Spray bars supplied from heated 15 HP Wash Pump Wash Section: - 4 Upper & 4 Lower Wash Spray bars supplied from same 15 HP heated wash pump Isolation Section: - 1 SST Upper Airknive and 1 SST lower Airknive supplied by first 15 hp blower in dry section - Wet Isolation with 1 upper and 1 lower spray bar supplied from 15 HP heated rinse pump - 1 SST Upper Airknive and 1 SST lower Airknive supplied by first 15 hp blower in dry section Rinse Section: - 3 Upper & 3 Lower spray bars supplied from 15 HP Heated Rinse Pump. Final Rinse: - 1 Upper & 1 Lower Final rinse spray bar supplied from customer’s DI supply. First Dry Section: - 15 HP Turbine blower w/ 2 upper and 1 lower SST Airknives. Second Dry Section: - 15 HP Turbine blower w/ 2 upper and 2 lower SST Airknives. Third Dry Section: After Third Dry Section: - Machine has 1 Upper IR Heater Panel w/ temperature controller Power: 460 volt, 180 amps, 3 phase. Machine Dimensions: 23’ long 5’10” wide. |
| 1997 Westklean Triton IV MIL SMT | |
|
|
|
Machine configured as follows - Stainless Steel Mesh Belt (18” Usable) Prewash Section: - 1 Upper & 1 Lower Prewash Spray bars supplied from heated 15 HP Wash Pump Wash Section: - 4 Upper & 4 Lower Wash Spray bars supplied from same 15 HP heated wash pump Isolation Section: - 1 SST Upper Airknive and 1 SST lower Airknive supplied by first 15 hp blower in dry section - Wet Isolation with 1 upper and 1 lower spray bar supplied from 15 HP heated rinse pump - 1 SST Upper Airknive and 1 SST lower Airknive supplied by first 15 hp blower in dry section Rinse Section: - 3 Upper & 3 Lower spray bars supplied from 15 HP Heated Rinse Pump. Final Rinse: - 1 Upper & 1 Lower Final rinse spray bar supplied from customer’s DI supply. First Dry Section: - 15 HP Turbine blower w/ 2 upper and 1 lower SST Airknives. Second Dry Section: - 15 HP Turbine blower w/ 2 upper and 2 lower SST Airknives. Utility Sink at entrance end. Power: 460 volt, 185 amps, 3 phase. Machine Dimensions: 18’11” long 5’5” wide. |
|
Address: 22795 Savi Ranch Pkwy Unit D Yorba Linda, CA 92887 |
Contact: Phone: (714) 394-3870 Fax: (714) 637-4157 |
E-mail: Online Form |